What are the precautions for choosing office furniture?

Different office furniture has different surface materials. For example, the legs of tables, chairs, and cabinets require hard mixed wood, which is relatively strong and can bear weight, while other materials can be used for internal materials.

Four points to pay attention to when choosing office furniture to ensure stability

This point can be seen when you put it on the ground, and some furniture only has three legs on the floor. Check to see if the table top is straight, not bowed or collapsed. The table top is raised, and the glass plate rotates when it is placed; the table top is recessed, and the glass plate is broken when it is placed on it.

Several points to be paid attention to when choosing office furniture

Whether it is pasting wood veneer, PVC or pasting pre-painted paper, pay attention to whether the leather is smoothly pasted, whether there are bulges, blisters, and loose seams. When checking, look at the light, you can’t see it if you don’t. Fraxinus mandshurica veneer furniture is more vulnerable to damage, and generally only lasts two years. As far as wood veneers are concerned, planed veneers are better than peeled veneers. Generally, the corners of veneer furniture are easy to lift up. You can pick the corners with your hands when choosing. If you pick them up, it means there is a problem with the glue.

Points to pay attention to when choosing office furniture

The sealing edge should be rounded, not straight. If the sealing edge is not flat, the inner material is wet and the sealing edge is easy to crack. For furniture inlaid with three plywood, the wrapping strip is nailed with nails. Pay attention to whether the nail holes are flat and whether the color of the nail holes is consistent with other parts. Usually nail holes are sealed with putty. If the putty bulges, it is not beautiful and easy to fall out.

Several points to pay attention to when choosing office furniture

If the wood has wormholes or shavings, it means that the drying is not complete. After checking the surface, open the cabinet door and drawer door to see if the inside material is decayed. You can pinch it with your fingernail. If you pinch it in, it means the inside material is decayed. Smell it with your nose after opening the cabinet door. If the nose is flushed, dazzling, or crying, it means that the formaldehyde content in the glue is too high, which is harmful to the human body.

Some points to pay attention to when choosing office furniture: reasonable installation of accessories

Panel furniture all use metal parts and plastic parts as fasteners, so the quality of metal parts also determines the inherent quality of panel furniture. The metal parts are required to be dexterous, smooth, well-plated, free of rust, burrs, etc., and the precision of the mating parts is higher. Plastic parts should be beautiful in appearance and bright in color, and the force and elasticity of the parts in use should be strong and not too thin. The opening type connector requires flexible rotation, and the inner spring should be properly tightened, so that the furniture will be balanced and relaxed during opening and use, and there is no friction.

Several points to pay attention to when choosing office furniture

While inquiring about the price, you must not forget to ask whether the furniture meets the relevant national environmental protection regulations and whether there are relevant certifications. If you are buying branded furniture, you can ask carefully and ask the salesperson to give a reasonable explanation of the smell, and check the quality inspection certificate. If it does pass the national inspection, some smells are necessarily incidental to paint, adhesives, etc., and open them after returning home. The cabinet door can be eliminated for a period of time.

Some points to pay attention to when choosing office furniture, the moisture content should not exceed 12%

The moisture content of northern furniture is generally not allowed to exceed 12%. If the moisture content is high, the wood is easy to warp and deform. Generally, consumers can touch the bottom surface of the furniture or the unpainted area when they buy it without a test instrument. If it feels damp, the moisture content is at least 50%, which is not usable at all. Another way is to sprinkle a little water on the unpainted part of the wood. If the bleeding is slow or not, it means that the moisture content is high. Furniture with too high moisture content not only has quality problems, but also increases the release rate of formaldehyde.