Artz Master Cabinet Sdn.Bhd.
Add: Lot 11936, Jalan Perajurit 1, Telok Gong, 42000 Port Klang, Selangor Darul Ehsan, Malaysia.
Email: sam@artzmaster.com
One of the characteristics of wooden office furniture is the increase in shrinkage, which is the origin of office furniture warping and cracking. In order to control the boring of wooden office furniture within a certain range, it is necessary to carry out boring treatment. Only in this way can wood office furniture be avoided and reduced. The deformation of office furniture is usually natural or artificial.
The reasonable storage of wooden office furniture is also an important way to avoid the deformation of wooden office furniture. The bottom of the pile of wooden office furniture should be flat when buffering, otherwise, the pile of office furniture will deform under its own pressure. Together, pile of wooden office furniture needs There is a piece of wood separated from the top and bottom, otherwise, the wooden office furniture is not ventilated, and it cannot be dull in time, and mildew will occur. The space is made of wooden rails and should be aligned up and down, such as the misalignment of wooden poles, and wooden office furniture will show many twists and turns when piled up. , Which greatly affects the utilization rate of wooden office furniture.
When manufacturing parts and components, such as the end of wooden office furniture cracking, the glue solution can enter the gap, and then clamp it with a clamp. After the clamp is taken out, the rubber is vulcanized, and it can be restored after a little treatment.
Choosing the correct production process is also an effective way to overcome the deformation of wooden office furniture. When real board manufacturing, the use of end inserts, horizontal lines, thick plate splicing, heart strings, long screws, etc. have a good effect. Some independently supported Solid wood profiles, such as table legs, legs, etc., are also used in the most stable parts of wooden office furniture. Use solid wood office furniture as the central material to make various hollow boards and blockboards, which avoid deformation and improve stability. ambition.
Previous: How To Maintain Solid Wood Office Furniture? How To Prevent Insects?
Next: How Should All Kinds Of Office Furniture Be Maintained During The Rainy Season?